Cosmetic Packaging Paper Box Printing Production Process

 URL：https://www.xiandagiftbox.com/cosmetic-packaging-paper-box-printing-production-process.html

1 Production process show

Printing production process, printing is divided into three stages:

Pre-printing → refers to the pre-printing work, generally refers to photography, design, production, typesetting, output film proofing and so on.

Printing → refers to the middle of the printing process, the process of printing the finished product through the printing press.

After printing → refers to the work of the later stages of printing, generally refers to the post-processing of printed materials, including overgluing (laminating), UV, oil, beer, hot stamping, embossing, laminating, bookbinding, cutting, etc., mostly used for promotional and packaging printing products.

2 The main printing products production introduction

1.packaging box production process

Photography, design, production, layout, printing, gluing (lamination), UV, oil, hot stamping, embossing, beer, sticking, packing.

2.Gift box production process

Photography, design, production, layout, printing, gluing (lamination), UV, oil, hot stamping, embossing, laminating, beer, sticking, packaging.

3.Tote bag production process

Photography, design, production, layout, printing, gluing (laminating), beer, sticking, packing.

3 Key processes

1.Gluing

Is a surface processing technology after printing, also known as printing overgluing, printing laminating or post-press film, refers to the use of laminating machine in the surface of the printed materials covered with a layer of 0.012-0.02mm thick transparent plastic film, and the formation of a paper-plastic combined product processing technology.

Also known as "over-plastic", "laminating", "film", etc., refers to the transparent plastic film through the hot press overlay to the surface of the printed materials, to protect and increase the role of gloss.

2.UV Printing

A kind of printing process through the ultraviolet light drying, curing ink, need to contain photosensitive ink and UV curing lamps with the application of UV printing is one of the most important content of the printing industry.

It is in a printed pattern you want to wrap on top of a layer of varnish (glossy, matte, etc.), mainly to increase the brightness of the product and the artistic effect, to protect the surface of the product, its high hardness, corrosion-resistant friction, not easy to appear scratches and so on. 

It is the production process often used for luxury beauty product boxes. Some laminated products are now changed to UV, can meet the environmental requirements, but UV products are not easy to bond, some can only be solved by local UV or sanding.

3.hot stamping

Also known as "hot stamping", the metal printing plate heating, Shi foil, embossed on the printed matter of gold text or patterns. A printing decoration process.

Is the required hot gold or silver hot stamping pattern made of convex plate heating, and then in the printed matter placed on the required colour of aluminium foil paper, pressure, so that the aluminium foil attached to the printed matter. 

There are many kinds of hot stamping paper materials, including gold, silver, laser gold, laser silver, black, red, green and so on. This process can make the surface of the printed material clear, beautiful, lustrous, the product itself is also wear-resistant!

4.Embossing

Also known as "embossing", an important process in the packaging post-press process, is a method of embossing without printing ink. When embossing, a set of concave and convex mould plates corresponding to the yin and yang of the graphic are used, and the substrate is placed between them, and embossed concave and convex graphics are pressed out by applying greater pressure.

The use of embossing moulds causes plastic deformation of the printed substrate under a certain amount of pressure, which results in artistic processing of the surface of the printed material. Embossed a variety of convex graphics and patterns, showing different shades of patterns, with a clear sense of relief, enhancing the three-dimensional sense of the printed materials and artistic force.

5.Fram

Framing can also be divided into the original framing and re-framing, the original framing is a good picture of the new painting according to the framing procedures for framing. 

Re-mounting is the original framing is not good or due to the management of the collection of poor storage, the occurrence of shells off, moisture and mould, bad rotten fracture, insects and rodents biting the heirloom painting and calligraphy and unearthed painting and calligraphy for the framing. After mounting the painting and calligraphy, firm, beautiful, easy to collect and arrange ornamental

6.Binding

The printed pages of the book, booklet processing into a book, or bills, tickets and other collation of supporting, stapled into a booklet and other post-press processing. Bookbinding, including bookbinding and binding two major processes. Staple is the book pages stapled to the cost, is the core of the book processing, binding is the processing of the book cover, is the binding.

In addition to these common above, with the brand of gift box packaging custom requirements, there are frosted, embossed, refractive and other processes.

Through the type of environmentally friendly biodegradable cosmetic paper packaging box, the choice of paper category, printing process, I believe that we will have twice the result with half the effort in the future when customising beauty makeup product packaging gift boxes.